Free op-com china clone for opel software Download

Op-com diagnostic interface is diagnostic cable designed for opel cars. Opcom Opel works as a multiplexer. We need install the Opcom Opel Software before using it. Below OBD2Repair share Free op-com china clone for opel software Download.

Opcom OP-Com China Clone Firmware 1.59 Opcom Opel diagonistic interface with PIC18F458 chip


Here OBD2Repair provide free Op-com diagnostic interface Driver Opcom Opel Software download link 

0p-com softwrae Download

The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

Software version: 2014---Please do not update this one online. or will be blocked, and useless

OP-COM opcom PC based Opel diagnostics

OP-COM opcom is a Windows-based diagnostic interface for Vauxhall and Opel cars.OP-COM is a PC based diagnostic program. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. Recently OP-COM opcom opel V1.59 is favord by lots of Vauxhall and Opel owners.This helps car owners and technicians quickly detect and identify malfunctions as well as determine solutions.

Opcom OP-Com China Clone Firmware 1.59 Opcom Opel diagonistic interface with PIC18F458 chip



Diagnostic codes are sent through the computer systems of the computer and read by diagnostic tools plugged into the OBD port. The interface is designed to read and eliminate fault codes, display live data, and allow output tests. Key programming and remote features are also available. The application supports the inspection of a wide range of automotive units and systems, such as the engine, transmission, radio, electronic climate control, engine cooling module, and so on. Opel makes use of many pins in the OBD connector. OP-COM addresses this through its diagnostic interface that functions like a multiplexer and intuitively chooses the suitable pin for communication.

Newest Version Opcom OP-Com for OPEL Available $19.88 Promotion

Now op-com have updated to V1.59, it just need 19.88USD. Although opcom for opel has cheap price,it has powerful functions. OBD2Repair supply the high quality op-com. so if you are hesitating where to buy op-com opcom opel,please go to obd2Repair. We'll offer you the available and high quality Opcom OP-Com for OPEL.

Opcom OP-Com China Clone Firmware 1.59 Opcom Opel diagonistic interface with PIC18F458 chip


OPCOM is a special PC Based diagnostic interface especially for OPEL.
Software Version: 2010.08 Firmware Version: 1.59

New OPCOM V1.59 Firmware 2010V Software Function:
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information:

Obd2Repair sell the high quality and available just 19.88USD newest version opcom opel If you want to know more information about Opcom OP-Com for OPEL ,pls feel free contact with us OBD2Repair any time.

HQ OP-COM opel 1.59 USB CAN diagonistic interface with PIC18F458 chip

What's new features? -- Op-com USB interface new opcom firmware 1.59 (V5) for Opel and Vauxhall diagnosis? Below OBD2repair share the informations for everyone who needed.

Opcom OP-Com China Clone Firmware 1.59 Opcom Opel diagonistic interface with PIC18F458 chip


1) OP-COM 1.59 connects to the car during 2013-2014.

2) Fixed bug

3) It works much better, faster without jamming or logout.

Op com diagnostic software: 08/2010 (2010V)

Operating system: Win XP only




Software video installation guide:

How to install op-com 2010V Hardware V1.59 CAN OBD2 for Opel

https://www.youtube.com/watch?v=OuCz5K6IYME


NOTE:
Any DIY firmware update is invalid on our OP-COM cables. You need to purchase new Opcom 1.59 interface .

2010V op com software supports English only. If you need German version, then choose opcom 2009V.


Customer feedback/review:

1) Opcom V1.60 is known to be buggy for Vectra-C so better to use v1.59 anyway

2) Op-com V1.59, Vectra C tested and its working like a charm

3) opcom v5 (1.59) hardware is the best cable. China clone V5 the one with real PIC18F458 works with 08/2010 china.

4) 150-200 Euros for an EU clone which is a disgrace (they neither made the original software, nor hardware, nor license hack, they just pick up the profit by selling for ridiculous amount somebody else's work). I would rather to spend 20 bucks worth v5 from China. It works.


PS:
Opcom Vehicle model reference:

Agila-A (2003-2007), Agila-B (2007 - or later)

 Ampera (2011 - or later)

Antara (2007- and newer)

Astra-F (1992-2002), Astra-G (1998 -2009), Astra-H (2004-2009), Astra-J (2010 - and later)

 Calibra (1990-1997)

 Cambo (2001-2003)

 Captiva (2009 - or later), Captiva MAXX (2009 - and later)

 C-Combo (2001-2009)

 Corsa-B (1994-2003), Corsa-C (2001-2009), Corsa-D (2009 - or later)

 Insignia (2008 - or later)

 Frontera (1996-1999), Frontera -B (1999-2004)

 GT (2007 - or later)

 Meriva (2002-2010), Meriva-B (2010 - or later)

 Mokka (2012 - or later)

 Monterey (1997-1999)

 Movano (1999-2009)

Omega -A (1990-1993), Omega-B (1994-2003)

 Signum (2003-200 Sintra (1997-1999) Speedster / VX220 (2001-2009) Tigra (1995-2000), Tigra-B (2005-2009) A-Vectra (1992-1995), Vectra-B (1996-2002), Vectra-C / Signum (2002-2009) Vivaro (2001-2009) Zafira (1999-2005), Zafira-B (2006-2010), Zafira Tourer C (2011 - or later) SAAB 9-3, SAAB 9-5

This is the old vehicle models list, the new models are added. if you want to know more informations, pls feel free contact with obd2repair  any time.

OP COM OPEL ACTIVATION INSTRUCTIONS

Opcom is the top Diagnostic Cable and has reasonable price.Customers could buy opcom for opel from OBD2Repair.Next Obd2repair share the opcom Activation Instructions.

1. COPY ALL FILES IN THE CD TO YOUR COMPUTER
2. RUN activate password.exe 


3. CLICK DIAGNOSTICS 


4. CLICK SPECIAL 

5. CLICK OPEL 


6. CLICK DIESEL PUMP 

7. CLICK PSG5 

8. CLICK ACTIVATE 

9. THE REGISTER CODE WILL BE CREATED AS SHOWN 




10. WRITE DOWN THE ACTIVATE CODE
11. RUN OP COM.EXE
12. SELECT ANY MODEL AND PERFORM DISGNOSIS, UNTIL THE SCREEN ASK
YOU ENTER THE ACTIVATE CODE. ENTER THE ACTIVATE CODE YOU JUST
GOT AND CLICK CONFIRM
13. REGISTERATION COMPLETED! 




 

OP-COM opcom opel or VAUX-COM Questions and Answers

 There are some problems about OP-COM opcom opel and  VAUX-COM. Below OBD2Repair answer for questions could help you use OP-COM opcom opel more easier.

What is OP-COM or VAUX-COM?
   Answer is easy: The Cheapest and Most Powerful Tool for diagnostic all Opel and Vauxhall cars. OP-COM known also as a VAUX-COM gives you real dealer level access to every Opel and Vauxhall Car. In this price range there is no better tool than OP-COM or VAUX-COM Interface for diagnostic Opel and Vauxhall Vehicles.


What cars are covered by OP-COM or VAUX-COM?
   Software from AutoM3 covers all Opel and Vauxhall cars till today. Every Opel or Vauxhall car equipped with Onboard Diagnostic System is covered by OP-COM and VAUX-COM Diagnostic Software. All Opel and Vauxhall cars since 1997 are fully supported by OP-COM and VAUX-COM Software. AutoM3 continuously update their software so you can be 100% sure that every new Opel and Vauxhall car will be supported by Genuine OP-COM or VAUX-COM Interface.

Which Car Electronic Control Modules are covered?
OP-COM or VAUX-COM covers all Electronic Control Modules which are available in your car. You can follow diagnostic on every module which is installed in your car. Examples of covered modules: Engine, Automatic Transmission, Airbags, Power Steering, ABS Brakes, ESP, Instrument Clusters, Immobiliser...

What can you do with OP-COM or VAUX-COM?
Basically everything what dealer can do. This is a real Dealer Level Diagnostic Tool and because it is made only for Opel and Vauxhall Cars you can be sure it will have best compatibility with every Opel and Vauxhall Vehicle. Examples of supported functions: Reading and Clearing Trouble Codes, Viewing Live Sensor Data, Testing of Actuators and Outputs, Reading Device Identification Numbers, Viewing Freeze Frame Data and much more...

China clone OP-com opel Read Security Code

As we all know, China clone OP-com opel has strong functions.For many customers reflect this op-com very useful.Next OBD2Repair shares the OP-com opel Read Security Code .


China clone OP-com opel Read Security Code
For programming new keys and immoboliser, functions the Security Code is required.
This code can normally be found on the Pass. Unfortunately, the Car Pass is often lost.
With China clone OP-COM you can read the security code from the following models:
  1.Corsa-C
  2.Meriva
  3.Tigra-B

Model selection
Corsa-C / Meriva / Tigra-B

  Choose Body
  Choose Instrument
  Choose EPROM info
  Now the Security Code can be read from EPROM

OP-com 2014 China Clone OPcom firmware 1.59 and 2010.08 opcom FW 1.54 difference

OP-com 2014 China Clone is opel Opcom diagnostic interface. OP-com 2014 China Clone OPcom 1.59 is obd2repair latest 2014 version diagonistic interface for Opel OP com  with PIC18F458 Chip.OPcom firmware 1.59 has the same price with OP-com FW v1.54,but added some new features. OP-com OBD2Repair 2014 China Clone OPcom firmware 1.59 add new features.

Opcom OP-Com China Clone Firmware 1.59 Opcom Opel diagonistic interface with PIC18F458 chip



 
Opcom 2014 china clone Software: works with official software OPCOM Professional 131223c English (or 131223h Romanian...)

OP com opel Professional 2014 is Auto Diagnostic Tool for Wauxhall, Opel, Saab(GM based Saab).

OBD2Repair Opcom 2014 china clone opcom New features:

1. Supports models from 1987 to 2011, 2012 , 2013 and 2014 (Astra J, Insignia, Ampera, Adam, Mokka, Opel, etc . )
2. Real-time view of data as graphs ( live graphics ) .
3. Many more encodings .
4. PIN code extractor .
5. GM based for SAAB 9-3; 9-5 CAN
6. Special Function: PSG5 Diesel Pump VP44 Diesel
7. DPF Static Regeneration
8. Read/Write EEPROM
9. Mileage correction
etc

2015 Opcom opel Firmware V1.59 with PIC18F458 chip diagonistic interface Software

 

OP-COM is a Windows based diagnostic program package for Opel / Vauxhall cars.Opcom opel has strong functions,such as  read and clear fault codes, display live data, perform output tests. Immobiliser support, remote and key fob programming, change variant coding of various control units, and a lot more.Now OBD2repair show  the  Opcom opel Firmware V1.59 with PIC18F458 chip diagonistic interface Software you, Hope the message can help you to buy the Opcom opel Firmware V1.59.

OP-Com Firmware V1.59 diagonistic interface Software:




 

Free update china clone opel Op-com opcom diagnostic interface to V1.59

As we all know, china clone opel Op-com opcom diagnostic interface has been updated  to V1.59.All of them are ork with 2010.08 opcom software. Next let OBD2Repair guide you how to update clone Opcom firmware to 1.59 

New opcom Opel FW 1.59 is available now.  Below we make the update instructions for clone Opcom firmware to 1.59 







2010.08 opcom clone software Free download link:

http://pan.baidu.com/s/1kTvDJZT


how to update china clone Op-com opcom firmware to 1.59

First: Download free 2014 op-com software, and install the program.

Second: Make sure obd2tuning.com Op com china clone 2014 onnect the computer to install the drivers correctly, PLS disconnect the internet.

Third: Open the OCflash and update the op-com with firmware 1.59 HEX file

Fourth: At last we opened the vaux-com software version is 2012.08, you can check obd2tuning.com opcom firmware version have be updated to 1.59.


china clone opcom have two version:  V1.39 Firmware and  V1.45 Firmware Op-com diagonistic interface, now FW 1.59 is the latest version Op-com opcom diagnostic interface.OPcom 1.59 has multi functions and avaliable price.

China OP-COM OPEL Vauxhall Diagonistic Programming Scanner

 If you have a Vauxhall, this product OP-COM a must have. With the cars increasing,this is really the only way to find out what's wrong with them.It is cann read outand clear fault codes, shows you live data, lets you to perform output test.Most of customers reflect OP-COM OPEL VAUXHALL is a worth buying product for Valuxhall Diagonisis.Also they extremely satisfied with this China op-com.  
Not only the OP-COM has cheap price, but also has strong functions.Compare with other Diagonistic interface,it is a good diagonistic tool to monitor the entire car giving your of an idea to what the problem might be.
 


Finally I would tell you about is that this is a china clone, the genuine OP-Com uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

Hope these information can help you more ewsily to buy OP-Com OPEL Vauxhall Diagonistic Programming Scanner.
This is from OBD2repair, 

OPcom OP-COM Auto Diagnostic Scan Tool for Opel Different Version of PCB Picture

 Now for the Newest Version of Firmware V1.59  OP-com  opel  is coming, Most of customers do not know the difference with the former Firmware version V1.39 and V1.45 difference. Next let OBD2repair tell you the difference of  Firmware V1.59 with the other two version op-com.

 Latest OPcom OP-COm V1.59 Firmware  with pic18f458 chip 

1.V1.59 Firmware OPcom connects to the car during 2013-2014.
2. Fixed bug
3.OPcom opel V1.59 Firmware works much better, faster without jamming or logout.


OP-COM opel V1.45 Firmware PCB


OPcom opel True V1.39 Firmware PCB




The OP-COM OPEL  V1.59 OBD2Repair  Scan tool lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.
The program OPcom  Opel supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.


 

 

Opcom Opel FW 1.59 HQ Opcom 1.59 firmware PCB with PIC18F458 chip

New Opcom  firmware 1.59 has the same price with FW 1.54, But Opcom Opel 1.59 has more functions than Op-com 1.54.Opcom OP-Com  new Firmware 1.59 with PIC18F458 chip.Next let Obd2repair show the HQ Opcom 1.59 firmware PCB with PIC18F458 chip to you.

HQ Opcom 1.59 firmware PCB with PIC18F458:





New OPCOM V1.59 Firmware 2010V Software Function:
 
1. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
2.It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information
 

Latest Version 1.59 Op-com 1.59 USB CAN interface for OPEL with PIC18F458 chip

Op-com FW 1.59 USB interface is latest version diagonistic interface for  Opel OP com  with PIC18F458 Chip. Opcom v5 (1.59) hardware is the best cable. Opcom OP-Com  new Firmware 1.59 support for almost all Opel cars, even new cars with CAN-BUS based diagnostic.OP-com firmware 1.59 connects to the car during 2013-2014.op-com 1.59 works much better, can  read and clear fault codes, faster without jamming or logout.




The Latest Version firmware 1.59  Features:

1.Firmware: opcom V1.59

2.Feature: With pic18f458 chip

3.Software version: 08/2010 (2010V)

4. It connects to the car during 2013-2014.

5. OPCOM is a special PC Based diagnostic interface especially for OPEL.

6. Never Update It Online, It Will Damage The OP-COM !

Op-com 1.59 OBD2Repair USB interface program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.OP com firmware 1.59 covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.What's more, The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.



 

Latest Version OPCOM Op-com opel V1.45 diagnostic interface tool FAQ

The OPCOM opel is a diagonistic interface,it make the communication well between the computer and vehicle.
The OPCOM Op-com opel V1.45  program lets you to read out and clear fault codes, shows you live data,
lets you to perform output test, and supports remote, and key programming.
The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
Next is customers' FAQ. It's OBD2Repair tell you.





OPCOM Op-com opel V1.45 diagnostic tool FAQ

 Q:  Does this op com  has any other language other than English?
A:  op com only have English version.

Q:What we can do with this opcom?
A: 1. You will get a feedback on the state of the activated output. This will helps you to find the failed. Components more easily. With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking.
   2. You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
   3. You will need the vehicle security code, which can be found on the CAR-PASS.
   4. You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva
   5. You can code SAB6, and SAB8 airbags with the software.
   6. The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
   7. The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.
   8. Compared to the TECH2, which is the dealers tool (with a 32 MB Card+CANdi interface), the price of OP-COM is quite affordable.


This article is compiled by www OBD2Repair com, 
if you have any advice on  it, pls feel free to contact 
OBD2Repair - China OBD2 RepairTool  Automotive Diagnostic 
Tools Center.

Op-com opel diagnostic interface Installation Instructions

Op-com opel is the newest obd2repair opel diagnostic interface.Op-com opel support for almost all Opel cars,
even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. Op com opel diagnostic
interface can read out and clear fault codes, dispaly live data, perform output test.
As so functions it has,  Op-com  opel Diagnostic interface become more and more popular between customers.
Now the problem is how to install Op-com . Next let obd2repair tell you the installation Instructions of OP-COM Opel .




Opcom Installation instructions

1 Download winrar and install,
2  Download opcom,
3  Right click on downloaded opcom and extract files to desired destination I use c:/    
      drive,
4  Now plug in opcom unit,
5  Open Device Manager you find this by right clicking computer in the start menu 
       then properties then top left corner for device manager (for win xp its under  
       hardware tab),
6  find opcom usb v2 right click on it then update driver,
7  Now click browse computer then browse again and locate the extracted opcom 
      folder from earlier and highlight the folder drivers 32 & 64bit click ok/next,
8  It should now install the drivers it may find a serial driver with no drivers this is 
      normal,
9 Run opcom from extracted folder click settings test interface it should come up   
     with test ended successfully.
You are now up and running.
With some antivirus you will need to add the extracted opcom folder to exclusions
and re-extract as it can find a false positive which is 100% safe.


This article is compiled by www OBD2Repair com, 
if you have any advice on  it, pls feel free to contact 
OBD2Repair - China OBD2 RepairTool  Automotive Diagnostic 
Tools Center.


 

Angelia Liao

 

 

ADD: 1102A, DongMing Business Bldg, Baoan district, Shenzhen 518113, China

 

Tel: +86-755-29438109

Email: Sales01@obd2tuning.com

Skype: OBD2TuningTool

Website: www.obd2repair.com

OPCOM OP-COM Diagnostic Cable for Opel

OP-COM is a Windows based diagnostic program package for Opel / Vauxhall cars.

The diagnostic program package covers a wide range of cars from 1990-2013, latest models are also included!

Main functions are read and clear fault codes, display live data, perform output tests. Immobiliser support, remote and key fob programming, 
change variant coding of various control units, and a lot more. 

Support a wide range of control units built into cars, like Engine, Transmission, ABS / ESP, Airbag, Instrument, Radio, Display, etc.
The diagnostic interface is USB based, easy to install, works under 32 and 64 bits version of Windows.

TFunction:

1.It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.

2.The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.

3.The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.

4.Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication. 
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)

5.Fault codes will be shown with all available information:

Full fault code text description

1) Full status information (Present, Not present, Intermittent)

2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window. 

3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.

4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast! 

You can also run output tests on many controllers.

PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps